A holder for storing ski poles vertically by attaching them to the headrest, instead of laying them on the car floor.

Every time I went skiing,
ski poles were always "just put on the floor" in the car.

While skis and boots had their designated spots,
poles were always left lying on the floor.

They were thrown in haphazardly,
getting in the way every time I loaded or unloaded.
They were a nuisance, but there was nothing I could do.

I used to think that was just how it was.

This holder is an accessory for storing ski poles vertically in the car
instead of leaving them on the floor.

For your peace of mind

・Attaches to the metal shaft of the headrest
・No modification to the vehicle required
・Simple structure, usable only when needed

This product is positioned as an accessory to assist with organizing and storing ski poles.

■ About the product

This product is a holder for storing ski poles vertically in the car.

It attaches to the metal shaft of the headrest, allowing you to position poles upright behind the second row of seats or in the cargo area.

By orienting poles vertically instead of horizontally on the floor, you can expect:

・The cargo floor to remain unobstructed
・Less interference with other luggage
・A simpler loading/unloading process
・Poles to be less likely to tangle
・Poles to be less likely to slide and scratch the cargo door
・A significant reduction in dead space

These are some of the benefits.

Please use it as an aid to create a designated spot for poles, rather than a "secure storage" solution.

■ About ski poles that can be stored

For typical ski poles, approximately 4 poles can be stored per holder.

This product has a configuration with two 4-pole ski pole holders, one on each side, allowing for a maximum of approximately 8 ski poles to be stored.

※ The number of poles that can be stored may vary depending on the pole thickness and grip shape.

■ About installation position

This product is designed to be installed offset to one side, rather than centered on the headrest.

This is to avoid:

・Flip-up third-row seats
・Interference when seats are moved

This is a design to avoid the above.

The vehicle used in the product images is a Nissan Serena (C28).

Interference points vary depending on the vehicle structure, so please adjust the installation position to suit your actual vehicle.

■ About installation

This product is designed to pass through the metal shaft of the headrest and be sandwiched between the headrest and the seat.

No drilling or modification to the vehicle is required, and no tools are used.

Furthermore, this product is designed to be installable on either the left or right side of the seat.

It can be used in either direction (front or back), allowing you to choose the installation position to suit your vehicle and usage.

■ About the stopper mechanism

The base is equipped with a stopper mechanism to prevent it from sliding down and coming off.

Also, the holder part is openable/closable.

・It won't open accidentally during use.
・It won't come off inadvertently when opening/closing.

To ensure this, one stopper is placed symmetrically on each side.

Please note that we do not guarantee that it will not interfere with all vehicles.
Please check the installation position and seat shape before use.

■ About materials and texture

This product uses PETG.

PETG is a material that has:

・High water resistance
・High durability
・Material properties suitable for in-car use

The material was selected with the scenario of loading snow or wet poles into the car in mind.

Since it is manufactured by 3D printing (additive manufacturing),
layer lines may be visible on the surface,
but there are no issues with its use.

Please understand this as a specification.

■ About headrest metal shaft spacing

This product can be installed on seats where the distance from end to end of the headrest metal shafts is approximately 18cm or less.

Also, it cannot be installed on:

・Vehicles where the headrest cannot be removed
・Seats with integrated headrests

Please check the shape of your vehicle's headrest before purchasing.

■ About usage scenes

When loading ski poles into the car with this product while driving,
please use ropes or belts to secure the ski poles firmly.

■ Set contents

・Seat mount base plate set
・4-pole ski pole holder ×2 (left and right)

■ About shipping

Usually, we ship within 2 business days (excluding weekends and holidays).

■ About shipping fees

Shipping is free.

■ Important notes

This product is manufactured by 3D printing (additive manufacturing),
and layer lines may be visible on the surface.

There are no issues with its function or strength,
and we appreciate your understanding of this specification.

■ Product development background

Ski poles can be placed on the floor if you want to.

That's why they were always stored on the floor.

But every time, it was a little bit of a bother, and a little bit annoying.

To solve that "little bit," I created this holder.

It's not a perfect storage solution.
It's simply a tool to create a state where you don't have to put them on the floor.